Products
PIR Motion Sensor For Lights, HC-7E
PIR Lights Stand Alone Type
220 VAC Mains (Upto 1000W Incandescent) (300W Fluorescent Max.)
General Information
Motion sensor is a fully automatic indoor and outdoor security/courtesy light controller capable of controlling up to 1000W incandescent or 30W x 10 fluorescent of lighting. At night, the built in passive infrared (PIR) motion sensor turns on the connected lighting system when it detects motion in its coverage area. During the day, the built in photocell sensor saves electricity by deactivating the lights.
An adjustable time lets you select how long the light stays on after activation. The LITE adjustment determine at what light level the lighting system will start operating when you set the motion sensor to automatic mode,
MODEL NO.: HC-7E
Features
Wall Mount Suitable
Weatherproof - IP44
Time & LUX Adjustment
Patented Modern Design
Automatic Operation
Saving of Electricity
PIR Lights Specifications
HC - 7E
Power Requirement
AC 220 ~ 240V / 50Hz
Lighting Load
Max 1,000W Incandescent or Max 300 W Fluorescent
Detection Angle
>Up to 120° at 20° C
Detection Distance
Min. 14M at 20° C
Swiveling Angle
Horizontal 70°, Vertical 35°
Mounting Height
Recommended at 1.8 ~ 2.0M (5.9 ~ 6.6 Ft) Wall Mount
Wall Switch Control
On / Off
Sensor Operation
Auto
Time Adjustment
From ( 10 ± 5) sec. to ( 4 ± 1) minutes
Lux Adjustment
Approx. 0 ~ 1,000Lux
Operating Temperature
>-20° C ~ +40° C
Warm Up Time
About 1 min
Protection Class
II
Protection Degree
IP44